Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM › from 2020.08
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301908 LIGHTING SYSTEM A

LIGHTING (EXT)  LIGHTING SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE LIGHTING SYSTEM (EXT)

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Light Control.


v.

Select the setting by referring to the table below.

Light Control
Display Default Content Setting Relevant ECU
Response Time*1 Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position Normal or Long Main Body ECU (Multiplex Network Body ECU)
Sensitivity Normal Adjusts the sensitivity of the automatic light control sensor.*A Light2, Light1, Normal, Dark1 or Dark2
Disp Ex ON Sen NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
Disp Ex OFF Sen NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*C LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
Extended Headlight Lighting*2 30 s Sets the headlight lighting time after the power switch is turned off. 30 s, 60 s, 90 s or 120 s

*1: for Australia

*2: w/ Extended Headlight Lighting System


HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A
E362631E01
0.146,0.542 1.542,0.823 1.396,0.281 10 false Lighting Brightness 0.167,1.385 0.917,1.615 0.75,0.229 10 false Setting 2.354,1.365 2.865,1.583 0.51,0.219 10 false Dark2 6.51,0.542 6.958,0.771 0.448,0.229 10 false Bright 4.354,1.365 4.885,1.583 0.531,0.219 10 false Normal 5.396,1.365 5.917,1.573 0.521,0.208 10 false Light1 3.365,1.365 3.875,1.583 0.51,0.219 10 false Dark1 6.417,1.365 6.938,1.573 0.521,0.208 10 false Light2 2.448,0.542 2.958,0.76 0.51,0.219 10 false Dark

*B
E362631E02
0.156,0.406 1.771,0.875 1.615,0.469 10 false Brightness of lowering the lights 0.208,1.365 0.958,1.594 0.75,0.229 10 false Setting 2.333,1.375 2.844,1.594 0.51,0.219 10 false DARK2 6.5,0.552 6.948,0.781 0.448,0.229 10 false Bright 4.302,1.375 4.969,1.615 0.667,0.24 10 false NORMAL 5.333,1.375 5.854,1.583 0.521,0.208 10 false LIGHT1 3.344,1.375 3.854,1.594 0.51,0.219 10 false DARK1 6.365,1.354 6.885,1.563 0.521,0.208 10 false LIGHT2 2.458,0.563 2.969,0.781 0.51,0.219 10 false Dark

*C
E362631E03
0.115,0.385 1.979,0.917 1.865,0.531 10 false Brightness when canceling the lowering of the lights 0.167,1.365 0.917,1.594 0.75,0.229 10 false Setting 2.323,1.354 2.833,1.573 0.51,0.219 10 false DARK2 6.479,0.552 6.927,0.781 0.448,0.229 10 false Bright 4.302,1.354 4.99,1.594 0.688,0.24 10 false NORMAL 5.344,1.344 5.865,1.552 0.521,0.208 10 false LIGHT1 3.344,1.365 3.854,1.583 0.51,0.219 10 false DARK1 6.396,1.375 6.917,1.583 0.521,0.208 10 false LIGHT2 2.458,0.552 2.969,0.771 0.51,0.219 10 false Dark



b.

Customizing with the Multi-display (for Navigation Receiver Type)

i.

Turn the power switch on (IG).


ii.

Enter the following menus: SETUP / Vehicle / Vehicle customization / Light settings.


iii.

Select the setting by referring to the table below.

Lights Settings
Display Default Content Setting Relevant ECU
Light Sensor Sensitivity 0 Adjusts the sensitivity of the automatic light control sensor*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A
E362631E04
0.146,0.51 1.542,0.792 1.396,0.281 10 false Lighting Brightness 0.188,1.323 0.938,1.552 0.75,0.229 10 false Setting 2.49,1.354 3,1.573 0.51,0.219 10 false -2 6.5,0.552 6.948,0.781 0.448,0.229 10 false Bright 4.531,1.354 5.063,1.573 0.531,0.219 10 false 0 5.531,1.365 6.052,1.573 0.521,0.208 10 false 1 3.5,1.365 4.01,1.583 0.51,0.219 10 false -1 6.583,1.375 7.104,1.583 0.521,0.208 10 false 2 2.448,0.542 2.958,0.76 0.51,0.219 10 false Dark



c.

Customizing with the Multi-display (for Radio and Display Type)

i.

Turn the power switch on (IG).


ii.

Enter the following menus: SETUP / Vehicle / Vehicle settings.


iii.

Select the setting by referring to the table below.

Vehicle Settings
Display Default Content Setting Relevant ECU
Light Sensor Sensitivity 0 Adjusts the sensitivity of the automatic light control sensor.*A -2, -1, 0, 1 or 2 Main Body ECU (Multiplex Network Body ECU)

HINT:

The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.


*A
E362631E04
0.146,0.51 1.542,0.792 1.396,0.281 10 false Lighting Brightness 0.188,1.323 0.938,1.552 0.75,0.229 10 false Setting 2.49,1.354 3,1.573 0.51,0.219 10 false -2 6.5,0.552 6.948,0.781 0.448,0.229 10 false Bright 4.531,1.354 5.063,1.573 0.531,0.219 10 false 0 5.531,1.365 6.052,1.573 0.521,0.208 10 false 1 3.5,1.365 4.01,1.583 0.51,0.219 10 false -1 6.583,1.375 7.104,1.583 0.521,0.208 10 false 2 2.448,0.542 2.958,0.76 0.51,0.219 10 false Dark