Home › Drivetrain › P410 (HYBRID TRANSMISSION / TRANSAXLE) › ELECTRONIC SHIFT LEVER SYSTEM › from 2020.08
RM2070E _52 Drivetrain _061915 P410 HYBRID TRANSMISSION / TRANSAXLE _0301645 ELECTRONIC SHIFT LEVER SYSTEM J

P410 HYBRID TRANSMISSION / TRANSAXLE  ELECTRONIC SHIFT LEVER SYSTEM  Auxiliary Battery Low Voltage  


DESCRIPTION

If the transmission control ECU assembly judges that the power source voltage (+B) is low (including due to a depleted auxiliary battery), or the meter ECU detects a malfunction of the CAN communication system (communication stop), a warning message is displayed on the combination meter sub-assembly (w/o Multi-information Display).

When the transmission control ECU assembly judges that the power source voltage (+B) is low (including due to a depleted auxiliary battery), a warning message is displayed on the multi-information display (w/ Multi-information Display).

PROCEDURE

1.CHECK VEHICLE CONDITION
a.

Check the vehicle condition.

Result :
Result Proceed to
w/o Multi-information Display A
w/ Multi-information Display B




A

2.READ VALUE USING GTS (LOW VOLTAGE ACTUATOR ABNORMAL HISTORY)

B

5.CHECK AUXILIARY BATTERY
2.READ VALUE USING GTS (LOW VOLTAGE ACTUATOR ABNORMAL HISTORY)
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Enter the following menus: Body Electrical / Transmission Control / Data List / Low Voltage Actuator Abnormal History.


d.

Read the Data List displayed on the GTS.

Result
Result Proceed to
"Low Voltage Actuator Abnormal History" is ON. A
"Low Voltage Actuator Abnormal History" is OFF. B


e.

Turn the power switch off.



A

3.CHARGE OR REPLACE AUXILIARY BATTERY

B

3.CHARGE OR REPLACE AUXILIARY BATTERY
a.

Charge or replace the auxiliary battery. (See page Power Source / Network>2ZR-FXE (BATTERY / CHARGING)>AUXILIARY BATTERY>COMPONENTS)



NEXT

4.CHECK OPERATION
4.CHECK OPERATION
a.

Turn the power switch on (READY).


b.

With the brake pedal depressed, select neutral (N).


c.

Push the P position switch (transmission shift main switch).


d.

Check that "WHEN PARKING, APPLY PARKING BRAKE SECURELY" is not displayed on the combination meter sub-assembly.


e.

Turn the power switch off.


f.

Disconnect the P CON MAIN fuse and wait for 30 seconds or more.


g.

Check that the electronic shift lever system operates correctly.



NEXT

END

5.CHECK AUXILIARY BATTERY
a.

Check the auxiliary battery (See page Power Source / Network>2ZR-FXE (BATTERY / CHARGING)>CHARGING SYSTEM>ON-VEHICLE INSPECTION).

Result
Result Proceed to
Auxiliary battery is OK A
Recharge auxiliary battery B
Replace auxiliary battery C



A

7.CHARGE AUXILIARY BATTERY

B

7.CHARGE AUXILIARY BATTERY

C

6.REPLACE AUXILIARY BATTERY
6.REPLACE AUXILIARY BATTERY

NEXT

8.CHECK OPERATION
7.CHARGE AUXILIARY BATTERY

NEXT

8.CHECK OPERATION
8.CHECK OPERATION
a.

Turn the power switch on (READY).


b.

With the brake pedal depressed, select neutral (N).


c.

Push the P position switch (transmission shift main switch).


d.

Check that "INSUFFICIENT AUX BATTERY CHARGE WHEN PARKING, APPLY PARKING BRAKE SECURELY THEN SEE OWNER'S MANUAL." is not displayed on the multi-information display.


e.

Turn the power switch off.


f.

Disconnect the P CON MAIN fuse and wait for 30 seconds or more.


g.

Check that the electronic shift lever system operates correctly.



NEXT

END