Home › Vehicle Exterior › ACOUSTIC VEHICLE ALERTING SYSTEM › VEHICLE APPROACHING SPEAKER › from 2020.08
RM2070E _59 Vehicle Exterior _093033 ACOUSTIC VEHICLE ALERTING SYSTEM _0445520 VEHICLE APPROACHING SPEAKER G

ACOUSTIC VEHICLE ALERTING SYSTEM  VEHICLE APPROACHING SPEAKER  INSPECTION  


PROCEDURE

Hide 86570 1.INSPECT VEHICLE APPROACHING SPEAKER ASSEMBLY

a.
E220216C54
1.531,1.281 1.323,1.698 false 1.854,1.271 2.052,1.688 false 0.094,0.031 0.333,0.24 0.24,0.208 10 false *a 1.26,1.677 1.5,1.885 0.24,0.208 10 false - 2.042,1.688 2.281,1.896 0.24,0.208 10 false +
*a Component without harness connected
(Vehicle Approaching Speaker Assembly)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω


HINT:

Make sure that there are no problems such as looseness or play with the installation of the vehicle approaching speaker assembly. If the result is not as specified, replace the vehicle approaching speaker assembly.