This DTC is stored when items controlled by the certification ECU (smart key ECU assembly) cannot be customized via the navigation system vehicle customization screen.
The certification ECU (smart key ECU assembly) controls the entry and start system related items that are customizable via the navigation system vehicle customization screen.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| B15F7 | Certification ECU (smart key ECU assembly) vehicle setting processing malfunction | ·
CAN communication system ·
Entry and start system ·
Certification ECU (smart key ECU assembly) ·
Navigation receiver assembly |
Before replacing the certification ECU (smart key ECU assembly), refer to Service Bulletin.
Use the GTS to check if the CAN communication system is functioning normally.
CAN communication DTCs are not output.
OK
NG
for Entry Function:
Check if the entry and start system is malfunctioning (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Entry Function)>HOW TO PROCEED WITH TROUBLESHOOTING).
for Start Function:
Check if the entry and start system is malfunctioning (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>HOW TO PROCEED WITH TROUBLESHOOTING).
Customization may not be possible depending on the malfunction in the entry and start system.
No malfunctions are present in the entry and start system.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (for Entry Function) | B |
| NG (for Start Function) | C |
A
B
C
Make a note of the customizable items for the certification ECU (smart key ECU assembly) related system.
The items shown as customizable via the navigation system vehicle customization screen can also be changed using the GTS. In the following step, the GTS will be used.
To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the entry and start system (for Entry Function) related items that can be customized via the navigation system vehicle customization screen (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Entry Function)>CUSTOMIZE PARAMETERS).
To match-up the items on the navigation system vehicle customization screen with the items on the GTS, check the customize parameters list for the entry and start system (for Start Function) related items that can be customized via the navigation system vehicle customization screen (See page Vehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function)>CUSTOMIZE PARAMETERS).
Using the GTS, check that it is possible to change the settings of the customize parameters that are available for customization via the navigation system vehicle customization screen.
The items available for customization via the navigation system vehicle customization screen can be customized successfully using the GTS.
OK
NG