WHEN REMOVING,INSTALLING,REPAIRING OR REPLACING PARTS > REPAIR PROCEDURE OF HEADLIGHT ASSEMBLY |
| INSTALL UPPER HEADLIGHT PROTECTOR RETAINER |
![]() |
Cut off the part shaded in the illustration and sand smooth with sandpaper.
![]() |
Install the upper headlight protector retainer with the 2 screws.
| INSTALL LOWER HEADLIGHT PROTECTOR RETAINER |
![]() |
Cut off the part shaded in the illustration and sand smooth with sandpaper.
![]() |
Install the lower headlight protector retainer with the 2 screws.
| INSTALL LOWER HEADLIGHT BRACKET |
![]() |
Cut off the part shaded in the illustration and sand smooth with sandpaper.
![]() |
Install the lower headlight bracket with the 3 screws.