FRONT FENDER APRON > ASSEMBLY REPLACEMENT



  1. K104254
    With the cowl top side panel removed.

REMOVAL

Symbol meaning
K100014
Remove Weld Points
K100016
Remove Weld Points

K102763E01


K102764E01


INSTALLATION

Symbol meaning
K100019
Plug Weld
K100021
Plug Weld
INSTALLATION POINT
  1. Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
  2. Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension diagram)
  3. Make sure to attach correctly in accordance with the body dimension diagram as this part affects the front wheel alignment.
  4. After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)
  5. After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

K102766E01


K102765E01