REAR FLOOR SIDE PANEL > ASSEMBLY REPLACEMENT
With the body lower back panel removed.
REMOVAL
Symbol meaning
Remove Weld Points
Remove Weld Points
Remove Weld Points
INSTALLATION
Symbol meaning
Plug Weld
Plug Weld
Plug Weld
INSTALLATION POINT
When welding *1, make a hole on a new part for plug welding and weld the panel with the panel behind completely.
After welding, apply body sealer to the corresponding parts. (See the painting / coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.