LUBRICATION SYSTEM > GENERAL



OUTLINE
  1. The lubrication circuit is fully pressurized and oil passes through an oil filter sub-assembly.

  2. A trochoid gear type oil pump assembly, which is driven directly by the crankshaft, is provided in the front of the cylinder block sub-assembly.

  3. The oil filter sub-assembly is installed diagonally downward from the side of the cylinder block sub-assembly to realize excellent serviceability.



  4. The camshaft (intake) is provided with a camshaft timing gear assembly, and cylinder head sub-assembly is provided with a camshaft timing oil control valve assembly. The VVT-i system is operated by the engine oil.

     
    Oil Capacity
    Dry
    4.1 liters (4.3 US qts, 3.6 Imp. qts)
    With Oil Filter Sub-assembly
    3.7 liters (3.9 US qts, 3.3 Imp. qts)
    Without Oil Filter Sub-assembly
    3.4 liters (3.6 US qts, 3.0 Imp. qts)


    W105972E01


    Text in Illustration 
    *1
    Camshaft Timing Oil Control Valve Assembly
    *2
    VVT-i Controller (Camshaft Timing Gear Assembly)
    *3
    No. 1 Chain Tensioner Assembly
    *4
    Oil Control Valve Filter
    *5
    Oil Jet
    *6
    Oil Pump
    *7
    Oil Strainer Sub-assembly
    *8
    Oil Filter Sub-assembly