WIPER AND WASHER SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
Wiper and Washer System
The wiper and washer system comprises the following parts and functions:
| Component | Function |
| Windshield Wiper Switch Assembly | Outputs the switch position signal to the windshield wiper motor assembly and the rear wiper motor assembly. |
| Front Wiper Motor and Link Assembly | Activates the front wiper arm and blade in accordance with position signal of the windshield wiper switch assembly. |
| Rear Wiper Motor Assembly | Activates the rear wiper arm and blade in accordance with the position signal of the windshield wiper switch assembly. |
| Windshield Washer Jar Assembly | Activates the windshield washer motor and pump assembly and rear washer motor and pump assembly in accordance with the signal from the washer switch. |
| SYSTEM CONTROL |
Washer-Linked Wiper
When the washer switch for either the front or rear wipers is held ON for approximately 0.5 to 1.2 seconds, the wipers start to operate almost simultaneously with the spraying of the washer fluid and stop when the switch is turned OFF. When held ON for longer than approximately 1.2 seconds, the operations above will continue for about 2.5 seconds after the switch is turned OFF.

| CONSTRUCTION |
Front Washer Nozzle
Spray type washer nozzles are located on the cowl top ventilator louver sub-assembly. These nozzles can spray windshield washer fluid over a wide area by spraying it in a fan shape. The washer fluid volume has been reduced so as not to hinder the driver's view when the washer system is operated.

| *1 | Hood | *2 | Front Washer Nozzle |
| *a | View from A | *b | Main Flow Center |
| *c | Fluid Volume | - | - |
Rear Washer Nozzle
Washer nozzle is located on the back door panel.

| *1 | Back Door Panel | *2 | Rear Washer Nozzle |
| *a | View from A | - | - |