LIGHTING SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. Daytime Running Light System

    Component
    Function
    Main Body ECU (Multiplex Network Body ECU)
    The main body ECU (multiplex network body ECU) receives various signals and illuminates the daytime running lights via the running light relay (headlight relay).
    No.2 Engine Room Relay Block
    Running Light Relay (Headlight Relay)
    The running light relay supplies power to the high beams to operate them as daytime running lights. (The high beams are illuminated at reduced intensity.)
    Headlight Dimmer Switch Assembly
    Light Control Switch
    The light control switch outputs a light control signal and transmits it to the main body ECU (multiplex network body ECU).
    Power Management Control ECU
    The power management control ECU receives the power switch signal, and outputs a READY signal to the main body ECU (multiplex network body ECU).
    Parking Brake Switch Assembly
    The parking brake switch assembly outputs a parking brake operation signal to the main body ECU (multiplex network body ECU).

  2. Light Reminder System

    Component
    Function
    Main Body ECU (Multiplex Network Body ECU)
    Outputs taillight illumination signals and driver's door open signals to the combination meter assembly.
    Front Door Courtesy Light Switch Assembly (for Driver)
    Detects whether driver's door is open or closed and transmits a signal to the main body ECU (multiplex network body ECU).
    Combination Meter Assembly
    Receives taillight illumination signals and driver's door open signals from the main body ECU (multiplex network body ECU) when the ignition switch is turned off, and sounds the buzzer.


SYSTEM CONTROL
  1. Daytime Running Light System

    1. If the READY signal is output from the power management control ECU to the main body ECU (multiplex network body ECU) when the light control switch and the parking brake pedal are both off, the main body ECU (multiplex network body ECU) activates the running light relay (headlight relay) and illuminates and fades the headlight high beams.


FUNCTION
  1. Light Reminder System

    1. The light reminder system warns the driver using a buzzer when the meter ECU inside the combination meter assembly receives the driver's door courtesy light switch signal via the main body ECU (multiplex network body ECU) and the ignition switch is turned off and the door is opened with the taillights kept on. The buzzer is located inside the combination meter assembly.

      Light Control Switch Position
      Power Switch
      Door
      Buzzer
      TAIL, HEAD
      Switch off
      Open
      Sounds
      Closed
      -


FAIL-SAFE
  1. Daytime Running Light System

    1. The daytime running light system turns off the daytime running lights to protect the inside circuits if a malfunction occurs in the circuits and a load is applied to the running light relay (headlight relay).

      Problem
      Outline
      Running Light Relay (Headlight Relay) Overheated
      Turns off whichever daytime running light which is overloaded. (even if the light is dimmed.)
      Headlight High Beam Illumination Request and Daytime Running Light Illumination Request Overlapped
      Prioritizes turning on the headlight high beams.