AUDIO AND VISUAL SYSTEM > GENERAL |
| OUTLINE |
Audio Head Unit
A radio receiver assembly and a radio and display receiver assembly are available for the audio head unit.
A Thin Film Transistor Liquid Crystal Display (TFT LCD) is used for the multi-display of the radio and display receiver assembly. The multi-display shows the audio screen, Bluetooth hands-free screen, vehicle information screen, etc. and can be operated using touch operation.
On the radio screen of the radio and display receiver assembly, up to 6 radio station presets from different tuners can be displayed on the screen. Additionally, text information of the selected station can be displayed. It is possible to store 6 sets of 6 presets.

| *a | Radio Station Mix Preset Area | *b | Text Information Display Area |
Discs containing MPEG audio layer-3 (MP3) files and Windows Media Audio (WMA) files can be played.
Discs with the marks shown below can be played.

XM Satellite Radio (Models with Radio and Display Receiver Assembly)
XM satellite radio is a service that uses the signals from 2 satellites in geostationary orbit to make it possible to capture digital radio broadcasts (XM satellite radio) from over 170 channels. XM satellite radio enables users to constantly receive their favorite programs.
HD Radio (Models with Radio and Display Receiver Assembly)
In-Band On-Channel (IBOC) type digital radio broadcasts (HD Radio) can be received. In-Band On-Channel (IBOC) adds digital signals to the existing analog signal band range and both sidebands, enabling analog FM-sound quality for AM stations and CD-sound quality for FM stations. When the digital signals cannot be received, the radio automatically switches to analog signal reception mode.


The HD radio tuner can receive simple broadcast data along with digital audio broadcast data, enabling support for a multi-broadcast function. With this function, 2 programs, such as the main program and music, can be received simultaneously. Additionally, tag information from the received station can be stored in memory.
Automatic Sound Levelizer (ASL)
The Automatic Sound Levelizer (ASL) function automatically adjusts the sound volume in order to enable clear audio quality even when vehicle noise increases (as vehicle noise increases, the volume is turned up, etc.).
Vehicle speed signals are received from the combination meter assembly and used for ASL control.
USB Audio System
A USB port is provided that enables operation of a USB memory stick, Media Transfer Protocol (MTP) device, a portable audio player (USB type), an iPod or an iPhone.
| Model | Generation | Firmware or OS |
| iPod | 5G | 1.3 |
| iPod nano | 1G | 1.3.1 |
| 2G | 1.1.3 | |
| 3G | 1.1.3 | |
| 4G | 1.0.4 | |
| 5G | 1.0.2 | |
| 6G | 1.0 | |
| iPod classic | 1G | 1.1.2 |
| 2G (120GB) | 2.0.1 | |
| 2009 (160GB) | 2.0.4 | |
| iPod touch | 1G | iOS3.1.3 |
| 2G | iOS3.1.3 | |
| iOS4.2.1 | ||
| Late 2009 (8 GB) | iOS3.1.3 | |
| iOS4.2.1 | ||
| 3G (32 GB / 64 GB) | iOS3.1.3 | |
| iOS4.2.1 | ||
| 4G | iOS4.2.1 | |
| iPhone | 1G (iPhone) | iOS3.1.3 |
| 2G (iPhone3G) | iOS3.1.3 | |
| iOS4.2.1 | ||
| 3G (iPhone3GS) | iOS3.1.3 | |
| iOS4.2.1 | ||
| iPhone4 | iOS4.2.1 |
| USB Communication Speed |
|
| File System | FAT 16/32 (Windows) |
| Device Class | Mass Storage Class |
| File Format | MP3, WMA |

Bluetooth Audio System
The Bluetooth audio system enables users to enjoy music played on a portable player from the vehicle speakers via wireless communication.
| Specification / Profile | Version | |
| Bluetooth Specification | Version 1.1 or higher | Required |
| Version 2.1+EDR or higher | Recommended | |
| Profile | Advanced Audio Distribution Profile (A2DP) Version 1.0 or higher | Required |
| Advanced Audio Distribution Profile (A2DP) Version 1.2 or higher | Recommended | |
| Audio/Video Remote Control Profile (AVRCP) Version 1.0 or higher | Required | |
| Audio/Video Remote Control Profile (AVRCP) Version 1.4 or higher | Recommended | |
Bluetooth Hands-free System
The Bluetooth hands-free system allows the user to make or receive a call without taking their hands off the steering wheel when the system is linked with a Bluetooth-compatible cellular phone.
| Specification / Profile | Version | |
| Bluetooth Specification | Version 1.1 or higher | Required |
| Version 2.1+EDR or higher | Recommended | |
| Profile | Hands Free Profile (HFP) Version 1.0 or higher | Required |
| Hands Free Profile (HFP) Version 1.5 or higher | Recommended | |
| Dial-up Networking Profile (DUN) Version 1.1*1 | Recommended | |
| Object Push Profile (OPP) Version 1.1 or higher*2 | Recommended | |
| Personal Area Network (PAN) Version 1.0*1 | Required | |
| Phone Book Access Profile (PBAP) Version 1.0 or higher | Recommended | |
| Message Access Profile (MAP) Ver.1.0 or higher*1 | Recommended | |
| Serial Port Profile (SPP) Ver.1.1 or higher*1 | Required | |
![]() | "Bluetooth" is a trademark owned by Bluetooth SIG, Inc. |
When a Bluetooth phone is connected to the radio and display receiver assembly, e-mails and Short Message Service (SMS) messages received on the phone can be displayed or read out. (Messages may not be displayed depending on the message service or profile that the connected Bluetooth phone supports.)
Voice Recognition Search System (Models with Radio and Display Receiver Assembly)
Due to the Grapheme to Phoneme (G2P) function of converting sounds into text, songs on a USB memory device can be searched for by saying an artist name, album name, title or playlist name. Additionally, the adoption of the Gracenote MediaVOCS database improves the speech recognition ratio of the Grapheme to Phoneme (G2P) function.
![]() | Gracenote and MediaVOCS are trademarks owned by Gracenote. |
Steering Pad Switch Assembly
Switches that the driver often uses are provided on the steering wheel for convenience.
Touch tracer display that shows the steering pad switch operations on the combination meter assembly has been provided. This helps reduce the movement of the driver's line of vision, allowing the driver to concentrate on the road. For details on the touch tracer display, see the Meter/Gauge System in the METER/GAUGE/DISPLAY section.
| SPECIFICATION |
Audio Head Unit
| Audio Head Unit | Design | Specification |
| Radio Receiver Assembly | ![]() |
|
| Radio and Display Receiver Assembly | ![]() |
|
4-speaker System

| Location | Speaker Type | Quantity | Size | Impedance | Rated Input Power | |
| *1 | Front No. 1 Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 22 W |
| *2 | Front No. 2 Speaker Assembly | Tweeter | 2 | 25 mm (1.0 in.) | 4 Ω | 20 W |
6-speaker System

| Location | Speaker Type | Quantity | Size | Impedance | Rated Input Power | |
| *1 | Front No. 1 Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 22 W |
| *2 | Rear Speaker Assembly | Full Range | 2 | 160 mm (6.3 in.) | 4 Ω | 22 W |
| *3 | Front No. 2 Speaker Assembly | Tweeter | 2 | 25 mm (1.0 in.) | 4 Ω | 20 W |
Steering Pad Switch Assembly

| Location | Item | Switch |
| *1 | Audio | Volume +/- |
| *2 | Audio | MODE |
| *3 | Audio | Seek +/- |
| *4 | Navigation / Telephone | Voice*7 |
| *5 | Telephone | On Hook |
| *6 | Telephone | Off Hook |
| MAIN FEATURES |
XM Satellite Radio (Models with Radio and Display Receiver Assembly)
XM satellite radio is a subscription type digital broadcast service.
In addition to the 2 satellites, XM satellite radio is supported by 800 satellite earth stations (repeaters). As a result, it can receive broadcasts throughout the U.S.A. (except Hawaii and Alaska) and most parts of Canada.
If the signals from the satellites are disrupted by a tunnel, gulch, or high-rise buildings, the simultaneous broadcast (called "gap filler") through ground based signals helps achieve excellent reception that is free of interruptions.
XM satellite radio produces near CD-quality sound using a digital satellite broadcast. It is particularly convenient for long-distance drivers because it is unnecessary to tune to different stations.

| *1 | Satellite | *2 | Satellite Earth Station |
| PRECAUTION |
Ignition Switch Expressions
The type of ignition switch used on this model differs depending on the specifications of the vehicle. The expressions listed in the table below are used in this section.
| Expression | Ignition Switch (Position) | Power Switch (Condition) |
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON (IG) | ON (IG) | On (IG) |
| Ignition Switch ON (READY) | ON (READY) | On (Ready) |