NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM > DETAILS



FUNCTION
  1. Navigation Screen

    1. The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

      1. Map data in the extension module
      2. Global Positioning System (GPS) satellites
      3. Built-in gyro sensor
      4. Vehicle speed signal
      5. XM NavTraffic signal

    2. The functions of the navigation screen are listed below.

      Item
      Function
      Map Display
      Map Color Change
      Depending on the position of the light control switch, the screen changes to day mode or night mode.
      Taillight-interlocked Map Color Change
      Changes the color of the map screen that is displayed when the taillights are turned on.
      North Up / Heading Up
      1. If North Up is selected, regardless of the direction of vehicle travel, north is always up.
      2. If Heading Up is selected, the direction of vehicle travel is always up.
      3D Display
      Displays a 3-dimensional (3D) view of the map.
      Multi-step Scale Display
      Changes the map scale in 14 steps.
      Street Name Indication on Scrolled Map
      Displays the street name and city name even when the map screen is being scrolled.
      Road Number Sign Board Display (Models for U.S.A. and Canada)
      Displays the road number on the map.
      Point of Interest Display
      Displays selected types of points of interest as marks on the map.
      Route Guidance Demonstration
      Demonstrates the route guidance to the destination.
      Vehicle Icon
      Appears on the 3D display. The color can be changed among blue, red, yellow, green and purple.
      Destination Search
      Address Search
      A destination can be set by entering a city name, street name, intersection name, zip code and house number.
      Point of Interest Search
      Name /
      Category
      A destination can be set in 2 ways:
      1. The name of a POI can be entered and then searched for after selecting a search area. Search areas include defined areas (such as a user selected country, state and city), near the current position, near the main destination, or along the current route).
      2. A POI category can be selected and searched for near the current position, in a defined area (such as a user selected country, state and city), near the main destination, or along the current route.
      Previous Destination Search
      Stores the coordinates, names, and date of up to 100 locations that have been set as destinations in the past.
      Address Book (Memory Point) Search
      Sets a destination from the registered Address Book (Memory Point).
      Map Search
      A destination can be set by scrolling the cursor on the map.
      Coordinate Search
      A destination can be input by entering its coordinates.
      Voice-recognition Search
      A destination can be set up by voice command input.
      Entune Search
      A point searched for using Entune content can be set as a destination.
      Route Search
      Multiple Destination Setting
      Sets multiple destinations. It can also rearrange the sequence of the destinations.
      Multiple Route Search
      Searches for multiple routes.
      Search Condition Designation
      Searches for the fast, short and ecological routes.
      Detour Search
      Changes the route to detour around a section of the route.
      Avoid Traffic Search
      Manually changes to another route to avoid heavy congestion.
      National Border Conscious Search
      Searches for routes that do not cross the border of the U.S.A., Canada or Mexico.
      Guidance
      Voice Guidance
      Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
      Next Turn Guidance
      Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
      Distance-to-destination Display
      Displays the distance from the present location to the destination.
      Estimated Arrival Time Display
      Displays estimated arrival time.
      Others
      Voice Recognition
      Recognizes pre-programmed system commands spoken to operate the navigation system.



  2. Information Screen

    1. The vehicle information screen display includes the Trip Information, Energy Monitor and Vehicle Settings screens.

    2. Through the Vehicle Settings screen, the following items can be customized.

      1. Speed Sensitive Auto Lock
      2. Shift-Linked Auto Lock
      3. Shift-Linked Auto Unlock
      4. Remote 2-Press Unlock
      5. Lock Feedback Volume
      6. Daytime Running Lights (Except destination package models for Canada)



    3. The display screens and functions for Trip Information and Energy Monitor are as shown below.


      Y113842E01


      Item
      Outline
      (1)
      Clear Switch
      Clears all past information.
      (2)
      Average Speed
      Displays the value that has been calculated by the combination meter assembly, which is based on the distance driven and time elapsed since the ignition switch is turned ON.
      (3)
      Elapsed Time
      Displays the value that has been calculated by the combination meter assembly, which is based on the time elapsed since the ignition switch is turned ON.
      (4)
      Cruising Range
      Displays the approximate drivable distance.
      (5)
      Energy Switch
      Displays the energy monitor.
      (6)
      Average Per Minute Fuel Consumption
      1. Displays the value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the ignition switch is ON.
      2. Displays the average fuel consumption for the last minute, or since clear was last selected.
      (7)
      Recovered Energy
      1. Indicates the recovered energy for 1 minute with "E" symbols.
      2. The recovered energy status is calculated by the power management control ECU.
      (8)
      Current Per Minute Fuel Consumption
      Displays the instantaneous (Current) fuel consumption value that has been calculated by the combination meter assembly, which is based on the driven distance and the volume of fuel consumed (fuel injection signal), provided that the ignition switch is ON.
      (9)
      Trip Information Switch
      Changes to the average per minute fuel consumption screen.
      (10)
      Energy Monitor
      1. Indicates the energy transmission direction, making it possible to confirm the current drive method (engine, motor or both), the power generation status by the engine and status of regenerative energy use.
        1. The State Of Charge (SOC) of the battery can be checked on the meter. The meter shows the SOC in 8-levels.
        2. Displays the energy monitor status that has been calculated by the power management control ECU.

  3. Setup Screen

    1. The settings for the functions of the multi-display are available from the setup screen.

      Item
      Function
      Display Settings
      1. Map Menu and Camera screen adjustment
      2. Depending on the position of the headlight switch, the screen changes to day or night mode.
      General Settings
      1. The language can be selected.
      2. The beep sound can be turned off.
      3. Registered information (personal data) can be cleared.
      4. Distance unit can be changed.
      5. Keyboard layout can be changed.
      6. The voice guidance volume can be adjusted or switched off.
      7. Phone voice volume can be adjusted.
      8. Ring volume can be adjusted.
      9. Voice Dialog volume can be adjusted.
      10. Data can be stored on a USB memory device.
      11. Data can be copied from a USB memory device.
      12. Time zones and the on/off settings of daylight saving time can be changed. (Models for U.S.A. and Canada)
      13. System information can be displayed.
      Bluetooth Settings
      1. The connection to a Bluetooth device can be turned on or off.
      2. Connectable Bluetooth devices can be searched for.
      3. The names of the Bluetooth devices that are currently connected or that are in the connection history can be displayed in a list. Additionally, availability information for each Bluetooth device is displayed.
      4. PIN codes used for Bluetooth connection certification can be set.
      5. A profile for connecting to the internet can be set.
      Phone Settings
      1. The ring tone can be changed or turned off.
      2. Message reception notification can be turned on or off.
      3. E-mail reception notification can be turned on or off.
      4. Phone book data stored on a cellular phone can be transferred manually.
      Audio Settings
      1. HD radio system settings can be changed:
        1. Receive both analog and digital broadcasts
        2. Receive only digital broadcasts
        3. Receive only analog broadcasts


DIAGNOSIS
  1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.