FEATURES > PERFORMANCE



OUTLINE


  1. TOYOTA Hybrid System-II (THS-II)



    1. This system optimally performs cooperative control of the 1NZ-FXE engine, and Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2) in the P510 hybrid vehicle transaxle assembly that provides excellent transmission performance. Furthermore, this system uses a high-output HV battery with a nominal voltage of DC 144 V, and a variable-voltage system in which a boost converter boosts the operating voltage of the system to a maximum voltage of DC 520 V.


      V100884E01


      Text in Illustration 
      *1
      1NZ-FXE Engine
      *2
      Inverter with Converter Assembly
      *3
      HV Battery Assembly
      *4
      P510 Hybrid Vehicle Transaxle Assembly

      System Performance 
      Maximum System Output*
      kW (HP)
      73.6 (98.7)
      1. *: Maximum system output is engine output and MG2 output controlled by THS-II. MG2 output depends on power supplied by the HV battery.



  2. 1NZ-FXE Engine

    1. The 1NZ-FXE is an in-line 4-cylinder, 1.5-liters, 16-valve DOHC engine.



    2. This engine uses a high-expansion ratio Atkinson cycle, Variable Valve Timing-intelligent (VVT-i) system, Electric Throttle Control System-intelligent (ETCS-i) and Exhaust Gas Recirculation (EGR) system employing a highly efficient EGR cooler. In addition, use of an electric engine water pump assembly has eliminated the V-ribbed belt. Thus, improved engine performance, quietness, fuel economy, and cleaner emissions have been achieved.


      V103003


      Item
      Specification
      No. of Cyls. & Arrangement
      4-cylinder, In-line
      Valve Mechanism
      16-valve, DOHC with VVT-i
      Fuel System
      SFI
      Displacement
      cm3 (cu. in.)
      1497 (91.3)
      Max. Output (SAE-NET)*
      kW @ rpm (HP @ rpm)
      54 @ 4800 (72 @ 4800)
      Max. Torque (SAE-NET)*
      N*m @ rpm (ft.*lbf @ rpm)
      111 @ 3600 - 4400 (82 @ 3600 - 4400)
      1. *: Maximum output and torque rating are determined using the revised SAE J1349 procedure.



  3. P510 Hybrid Vehicle Transaxle Assembly



    1. The P510 hybrid vehicle transaxle assembly contains Motor Generator No. 1 (MG1) and Motor Generator No. 2 (MG2).


      V102230E01


      Text in Illustration 
      *1
      Motor Generator No. 2 (MG2)
      *2
      Motor Generator No. 1 (MG1)

      Item
      Specification
      Motor Generator No. 1 (MG1)
      Motor Generator No. 2 (MG2)
      Type
      Permanent Magnet Motor
      Permanent Magnet Motor
      Function
      Generate, Engine Starter
      Generate, Drive Wheels
      Cooling System
      Air-cooled
      Air-cooled
      Maximum Output
      kW (HP)
      -
      45 (60.3)
      Maximum Torque
      N*m (ft.*lbf)
      -
      169 (124.6)



  4. Suspension

    1. A MacPherson strut type independent suspension is used for the front.



    2. A torsion-beam type suspension is used for the rear.


      V100883



  5. Steering



    1. An Electric Power Steering (EPS) system is used.


      V102171

  6. Brake

    Item
    Specification
    Front Brake
    Type
    Ventilated Disc
    Rotor Size (D x T)*
    mm (in.)
    255 x 22 (10.04 x 0.87)
    Rear Brake
    Type
    Leading-trailing Drum
    Drum Inner Diameter
    mm (in.)
    228.6 (9.00)
    Brake Control System
    ABS with EBD, Brake Assist, TRAC, VSC, Hill-start Assist Control
    *: Diameter x Thickness