POWER DOOR LOCK CONTROL SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS
  1. The main components in the power door lock control system have the following functions:

    Component
    Function
    Door Courtesy Light Switch Assembly
    Detects whether the doors are open or closed and sends this information to the main body ECU (multiplex network body ECU).
    Door Lock Assembly
    Door Lock Position Switch
    Detects whether the doors are locked or unlocked and sends this information to the main body ECU (multiplex network body ECU).
    Door Lock Motor
    Drives the motor in response to signals from the main body ECU (multiplex network body ECU) and locks or unlocks the doors.
    Key-linked Switch
    Sends a lock or unlock request signal to the main body ECU (multiplex network body ECU) by the ignition key.
    Back Door Lock Assembly
    Back Door Courtesy Light Switch
    Detects whether the back door is open or closed and sends this information to the main body ECU (multiplex network body ECU).
    Door Lock Motor
    Drives the motor in response to signals from the main body ECU (multiplex network body ECU) and releases the back door latch.
    Back Door Opener Switch Assembly
    1. Sends back door opener switch signals to the main body ECU (multiplex network body ECU).*1
    2. Sends back door opener switch signals to the certification ECU (smart Key ECU Assembly).*2
    Power Window Regulator Master Switch Assembly
    Door Lock Switch
    Sends manual lock and unlock request signals to the main body ECU (multiplex network body ECU).
    Power Window Regulator Switch Assembly (Front Passenger)
    Door Lock Switch
    Unlock Warning Switch Assembly*1
    Detects whether or not the ignition key is inserted into the ignition key cylinder and sends this information to the main body ECU (multiplex network body ECU).
    Combination Meter Assembly
    Receives signals from the speed sensor and sends the vehicle speed signal to the main body ECU (multiplex network body ECU).
    Main Body ECU (Multiplex Network Body ECU)
    Drives all door lock motors in response to signals.
    Certification ECU (Smart Key ECU Assembly)*2
    Sends the back door opener switch signals to the main body ECU (multiplex network body ECU).

    1. *1: Models without Smart Key System
    2. *2: Models with Smart Key System


FUNCTION
  1. The power door lock control system has the following functions:

    Function
    Outline
    Manual Lock and Unlock
    This function can lock or unlock all doors by operation of the door lock switch.
    Manual Unlock Prohibition
    Performing the door lock operation with a door control transmitter will prohibit the doors from being unlocked by the door lock control switch.
    Key-linked Lock and Unlock
    This function, linked with the driver door key cylinder, can lock or unlock all the doors when a lock or unlock operation is effected.
    Key-linked Unlock (2-step Unlock)*3
    When the ignition key is inserted into the door lock cylinder and is turned once, the driver door is unlocked. Then, when the key is turned again, all doors are unlocked.
    Key Confinement Prevention
    1. When the key is inserted in the ignition key cylinder and the door lock operation is performed while the driver door is open, all the doors will be unlocked.*1
    2. When the electrical key transmitter sub-assembly is present in the interior detection area and a door lock operation is performed while the driver door is open, all the doors will be unlocked.*2
    Shift-linked Automatic Door Lock*3
    1. When the conditions listed below are met consecutively, this function causes all the doors to be automatically locked.
      1. The ignition switch is changed from off or on (ACC) to on (IG).
      2. All doors are closed.
      3. With the shift lever in P, the shift lever is moved to any position other than P.
      4. Any one of the doors is in an unlocked state.
    Speed-sensitive Automatic Door Lock*3*4
    1. When the conditions listed below are met, this function causes all the doors to be automatically locked.
      1. Vehicle speed is higher than approximately 20 km/h (12 mph).
      2. All doors are closed.
      3. Any one of the doors is in an unlocked state.
    Shift-linked Automatic Door Unlock*3
    When the ignition switch is on (IG), and the shift lever is in P, all the doors will be automatically unlocked.
    Driver Door Opening-linked Automatic Door Unlock*3*4
    All doors are automatically unlocked when the driver door is opened within 43 seconds after the ignition switch is changed from on (IG) to on (ACC) or off.
    Back Door Open
    Pressing the back door opener switch when the back door is unlocked will open the back door.

    1. *1: Models without Smart Key System
    2. *2: Models with Smart Key System

    HINT:
    *3: Customizable parameters can be configured by means of the customized body electronics system. For details, refer to the Repair Manual.
    *4: Default setting off.