WIPER AND WASHER SYSTEM > PRECAUTION |
| 1.PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL |
| System | See Procedure |
| Power Door Lock Control System |
Click here
|
| 2.IGNITION SWITCH EXPRESSIONS |
| Expression | Ignition Switch (Position) | Power Switch (Condition) |
| Ignition Switch off | LOCK | Off (Lock) |
| Ignition Switch ACC | ACC | On (ACC) |
| Ignition Switch ON (IG) | ON (IG) | On (IG) |
| Ignition Switch ON (READY) | ON (READY) | On (READY) |
| 3.PRECAUTION OF WASHER NOZZLE ADJUSTMENT |
Do not clean or adjust the washer nozzle with a safety pin, etc. because:
The washer nozzle tip is made of resin and could be damaged.
Adjustment is not necessary for this spray type washer nozzle (for Front Side). If it is necessary to change the nozzle angle, replace the washer nozzle (for Front Side) with one that has a different nozzle angle.
If the washer nozzle is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.