Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



DAYTIME RUNNING LIGHT SYSTEM
  1. Daytime running light control automatically turns on the high beam headlights (low-intensity) during the day to make the vehicle more visible to other drivers and pedestrians. Daytime running light control is operated by the main body ECU.

    1. This system is enabled when the following conditions are met (Headlight dimmer switch w/ DRL OFF function):
      1. Ignition switch is ON (IG).
      2. Engine revolution signal is received (engine running).
      3. Light control switch is in the DRL or tail position.
      4. Parking brake switch is off.
    2. This system is enabled when the following conditions are met (Headlight dimmer switch w/o DRL OFF function):
      1. Ignition switch is ON (IG).
      2. Engine revolution signal is received (engine running).
      3. Light control switch is in the off or tail position.
      4. Parking brake switch is off.