REAR SHOCK ABSORBER > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. REMOVE DECK TRIM SIDE PANEL ASSEMBLY (w/o Package Tray Trim) |
| 3. REMOVE REAR ABSORBER CAP (w/ Package Tray Trim) |
![]() |
Disengage the 2 claws and 2 guides, and remove the rear absorber cap.
| 4. REMOVE REAR SHOCK ABSORBER ASSEMBLY |
![]() |
Support the spring seat of the rear axle beam assembly using a jack and wooden block.
| *1 | Wooden Block |
| *2 | Jack |
![]() |
Remove the 2 nuts while keeping the piston rod from rotating.
Remove the rear shock absorber cushion retainer and rear suspension support.
![]() |
Remove the bolt while holding the nut and remove the rear shock absorber assembly.
| *1 | Wooden Block |
| *2 | Jack |
| 5. REMOVE REAR SUSPENSION SUPPORT STOPPER |
| 6. REMOVE REAR SUSPENSION SUPPORT ASSEMBLY |