Home › Power Source / Network › NETWORKING › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



DESCRIPTION
The main body ECU (multiplex network body ECU) and certification ECU (smart key ECU assembly)* control the LIN communication system. LIN communication system data and Diagnostic Trouble Codes (DTCs) can be read through the Data Link Connector 3 (DLC3).
When the system seems to be malfunctioning, use the Techstream to check for malfunctions and perform repairs.
  1. *: w/ Smart Key System

CHECK DLC3
  1. Check the DLC3 (Click here).


INSPECT AUXILIARY BATTERY VOLTAGE
  1. Measure the auxiliary battery voltage with the ignition switch off.

    Standard Voltage:
    11 to 14 V

    1. If the voltage is below 11 V, recharge or replace the auxiliary battery.