DTC P1606-308 Collision has been detected or Collision Sensor Connection (Open) |
DTC P1606-317 Collision has been detected or Collision Sensor Connection (Open) |
| DTC No. | INF Code | DTC Detection Condition | Trouble Area |
| P1606 | 308 | Collision detection A block signal is received from the airbag sensor assembly. (1 trip detection logic) |
|
| 317 | Collision detection Multiple wiring malfunctions occur simultaneously. (1 trip detection logic) |
|
| DTC No. | Data List |
| P1606-308 |
|
| P1606-317 |
| 1.CHECK VEHICLE FOR COLLISION DAMAGE |
Check the vehicle condition.
| Result | Proceed to |
| The vehicle is not damaged. | A |
| The vehicle is damaged. | B |
|
| ||||
| A | |
| 2.CHECK DTC OUTPUT (HYBRID CONTROL) |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Check if DTCs are output.
| Result | Proceed to |
| P1606 only is output. | A |
| P0A1D is output. | B |
Turn the ignition switch off.
|
| ||||
| A | |
| 3.CHECK AIRBAG SYSTEM |
Troubleshoot the airbag system (Click here).
| Result | Proceed to |
| The system is normal. | A |
| There is a malfunction in the system. | B |
|
| ||||
| A | |
| 4.CHECK INFORMATION CODE |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Access the freeze frame data of DTC P1606 and read the INF code.
| Result | Proceed to |
| INF code 308 is output. | A |
| INF code 317 is output. | B |
Turn the ignition switch off.
|
| ||||
| A | ||
| ||
| 5.CHECK DTC OUTPUT (HYBRID CONTROL) |
Connect the Techstream to the DLC3.
Turn the ignition switch to ON (IG).
Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
Check if DTCs are output.
| Result | Proceed to |
| One or two of the following conditions are met. | A |
| All of the following conditions are met. | B |
| DTC Output Status |
| DTC P3107-213 or P3107-214 is output. |
| DTC U0151-763 is output. |
| DTC U0110-160 or U0110-657 is output. |
Turn the ignition switch off.
|
| ||||
| A | ||
| ||