Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › OCCUPANT CLASSIFICATION SYSTEM

OCCUPANT CLASSIFICATION SYSTEM > DIAGNOSIS SYSTEM

for Preparation Click here



CHECK DLC3
  1. Check the DLC3 (Click here).


FUNCTION OF PASSENGER AIRBAG ON/OFF INDICATOR


  1. Initial check

    1. Turn the ignition switch to ON (IG).

    2. The passenger airbag ON/OFF indicator comes on for approximately 4 seconds, then goes off for approximately 2 seconds.



    3. Approximately 6 seconds after the ignition switch is turned to ON (IG), the passenger airbag ON/OFF indicator will indicate ON/OFF depending on the conditions listed below.

      Indicator Operation 
      Front Passenger Seat Condition
      Passenger Airbag ON/OFF Indicator
      SRS Warning Light
      ON Indicator
      OFF Indicator
      Vacant
      OFF
      ON
      OFF
      Adult is seated.
      ON
      OFF
      OFF
      Child is seated.
      OFF
      ON
      OFF
      Child restraint system is installed.
      Occupant classification system failure
      OFF
      ON
      ON

      HINT:
      1. The passenger airbag ON/OFF indicator illuminates based on the timing chart below in order to check the indicator light circuit.
      2. When the occupant classification system has trouble, both the SRS warning light and passenger airbag ON/OFF indicator ("OFF") come on. In this case, check the DTCs in the airbag system first.


      C123768E91


CHECK PASSENGER AIRBAG ON/OFF INDICATOR


    C253100
  1. Turn the ignition switch to ON (IG).

  2. Check that the passenger airbag ON/OFF indicator ("ON" and "OFF") comes on for approximately 4 seconds, then goes off for approximately 2 seconds.

    HINT:
    Refer to the indicator operation table in the preceding step regarding the passenger airbag ON/OFF indicator when the ignition switch is turned to ON (IG) and approximately 6 seconds elapse.