OCCUPANT CLASSIFICATION SYSTEM > DTC CHECK / CLEAR |
| DTC CHECK |
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Check for DTCs by following the prompts on the Techstream screen.
| DTC CLEAR |
Turn the ignition switch off.
Connect the Techstream to the DLC3.
Turn the ignition switch to ON (IG).
Turn the Techstream on.
Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Clear the DTCs by following the prompts on the Techstream screen.