Home › Vehicle Interior › SEAT › FRONT SEATBACK HEATER

FRONT SEATBACK HEATER > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH


    B231349E06
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seatback Heater Assembly LH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    15 to 30°C
    (59 to 86°F)
    4.37 to 5.59 Ω

    If the result is not as specified, replace the front seatback heater assembly LH.



2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH


    B231349E06
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Front Seatback Heater Assembly RH)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    15 to 30°C
    (59 to 86°F)
    4.37 to 5.59 Ω

    If the result is not as specified, replace the front seatback heater assembly RH.