Home › Vehicle Interior › HEATING / AIR CONDITIONING › RELAY (w/ PTC Heater)

RELAY (w/ PTC Heater) > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT PTC HEATER RELAY (PTC HTR NO. 1)


    E238310E02
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Auxiliary battery voltage not applied to terminals 1 and 2
    10 kΩ or higher
    3 - 5
    Auxiliary battery voltage applied to terminals 1 and 2
    Below 1 Ω

    1. If the result is not as specified, replace the relay.



2. INSPECT PTC HEATER RELAY (PTC HTR NO. 2)
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Auxiliary battery voltage not applied to terminals 1 and 2
    10 kΩ or higher
    3 - 5
    Auxiliary battery voltage applied to terminals 1 and 2
    Below 1 Ω

    1. If the result is not as specified, replace the relay.



3. INSPECT PTC HEATER RELAY (PTC HTR NO. 3)
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    Auxiliary battery voltage not applied to terminals 1 and 2
    10 kΩ or higher
    3 - 5
    Auxiliary battery voltage applied to terminals 1 and 2
    Below 1 Ω

    1. If the result is not as specified, replace the relay.