Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › ACCELERATOR PEDAL SENSOR

ACCELERATOR PEDAL SENSOR > REMOVAL

for Preparation Click here



1. REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY


    A266727
  1. Disconnect the accelerator pedal sensor assembly connector.

  1. Remove the 2 bolts and accelerator pedal sensor assembly.

    NOTICE:
    1. Avoid physical shock to the accelerator pedal sensor assembly.
    2. Do not disassemble the accelerator pedal sensor assembly.
    3. This accelerator pedal sensor assembly does not require lubrication.
    4. Do not apply oil or other lubrication to the accelerator pedal sensor assembly. If applied, the accelerator pedal sensor assembly must be replaced.