FRONT STABILIZER BAR > INSTALLATION |
| 1. INSTALL FRONT NO. 1 STABILIZER BAR BUSHING |
![]() |
Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar.
| *1 | Stopper Ring |
![]() | Front of the Vehicle |
![]() | Outside of the Vehicle |
| 2. INSTALL FRONT STABILIZER BAR |
![]() |
Install the front stabilizer bar to the front suspension crossmember sub-assembly so that the identification mark is positioned on the left side of the vehicle.
| *a | Identification Mark |
![]() | Left Side of the Vehicle |
| 3. INSTALL FRONT NO. 1 STABILIZER BRACKET LH |
![]() |
Install the front No. 1 stabilizer bracket LH to the front suspension crossmember sub-assembly with the 2 bolts.
![]() | Front of the Vehicle |
| 4. INSTALL FRONT NO. 1 STABILIZER BRACKET RH |
| 5. INSTALL STEERING LINK ASSEMBLY |
![]() |
Install the steering link assembly to the front suspension crossmember sub-assembly with the 2 bolts and 2 nuts.
| 6. INSTALL FRONT STABILIZER LINK ASSEMBLY LH |
Install the front stabilizer link assembly to the front shock absorber assembly with the nut.
| 7. INSTALL FRONT STABILIZER LINK ASSEMBLY RH |
| 8. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY |