PARKING BRAKE CABLE > INSTALLATION |
| 1. INSTALL NO. 1 PARKING BRAKE CABLE CLAMP |
Engage the 2 claws to install a new No. 1 parking brake cable clamp to the No. 3 parking brake cable assembly.
| 2. INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY |
Install the No. 3 parking brake cable assembly with the 4 bolts.

Engage clamp A to install the No. 3 parking brake cable assembly.
Insert the No. 2 parking brake cable assembly and No. 3 parking brake cable assembly into new clamp B and install clamp B to the vehicle.
Install the No. 3 parking brake cable assembly onto the backing plate with the bolt.
Connect the No. 3 parking brake cable assembly to the parking brake equalizer.
Engage the 2 claws to install the parking brake cable stopper.
| 3. INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for RH Side) |
Install the No. 1 fuel tank protector sub-assembly with the bolt.
Install the clip.
| 4. INSTALL FRONT NO. 4 FLOOR HEAT INSULATOR (for RH Side) |
![]() |
Install the front No. 4 floor heat insulator with the 2 nuts.
| 5. CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY |
| 6. ADJUST PARKING BRAKE LEVER TRAVEL |
Release the parking brake lever lock and return it to its off position.
Remove the rear console box (Click here).
w/ Console Box Lid:
Remove the No. 1 console box mounting bracket .
Remove the No. 3 console box mounting bracket .
![]() |
Turn the lock nut until the parking brake lever travel is corrected to within the specified range.
| *1 | Lock nut |
Operate the parking brake lever 3 to 4 times, and check the parking brake lever travel.
Check that the parking brake does not drag.
w/ Console Box Lid:
Install the No. 3 console box mounting bracket .
Install the No. 1 console box mounting bracket .
Install the rear console box (Click here).
| 7. INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET (w/ Console Box Lid) |
![]() |
Install the No. 3 console box mounting bracket with the bolt.
| *a | Stopper |
| 8. INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET (w/ Console Box Lid) |
![]() |
Install the No. 1 console box mounting bracket with the 3 bolts.
| 9. INSTALL REAR CONSOLE BOX ASSEMBLY |