Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT

BACK DOOR SUPPORT > DISPOSAL

for Preparation Click here



1. DISPOSE OF BACK DOOR STAY ASSEMBLY


    B127037E08
  1. Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.

  1. Wearing protective glasses, gradually cut the shaded part between A and B, shown in the illustration, using a metal saw to gradually release the gas.

    Specification:
    Area
    Measurement
    a
    130 mm (5.12 in.)

    NOTICE:
    Although the gas inside the back door stay assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.