UNLOCK WARNING SWITCH > REMOVAL |
| 1. REMOVE LOWER STEERING COLUMN COVER |
Release the tilt lever, and fully extend and lower the steering column.
Turn the steering wheel assembly to the left and remove the screw.
![]() |
Turn the steering wheel assembly to the right and remove the screw.
Remove the screw from the lower portion of the lower steering column cover.
![]() |
Disengage the 4 claws and remove the lower steering column cover.
| 2. REMOVE UPPER STEERING COLUMN COVER |
![]() |
Disengage the 2 claws and remove the upper steering column cover.
| 3. REMOVE UNLOCK WARNING SWITCH ASSEMBLY |
![]() |
Insert the key into the ignition key cylinder.
| *1 | Protective Tape |
Disconnect the connector.
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the unlock warning switch assembly.