DOOR CONTROL TRANSMITTER (w/o Smart Key System) > INSTALLATION |
| 1. INSTALL TRANSMITTER BATTERY |
![]() |
Install a transmitter battery (lithium battery: CR2016) with the positive (+) side facing upward, as shown in the illustration.
![]() |
Install the cover.
| 2. INSTALL DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY |
![]() |
Install the door control transmitter module set sub-assembly into the transmitter housing case.
| 3. INSTALL TRANSMITTER HOUSING COVER |
![]() |
Install the transmitter housing cover to the transmitter housing case.