Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ELECTRICAL KEY OSCILLATOR (for Front Side)

ELECTRICAL KEY OSCILLATOR (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE LOWER INSTRUMENT PANEL
(Click here)


2. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    B300435
  1. Disconnect the connector.

  1. Disengage the clamp and remove the No. 1 indoor electrical key antenna assembly.

    NOTICE:
    Be careful when removing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.