Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ELECTRICAL KEY OSCILLATOR (for Rear Floor)

ELECTRICAL KEY OSCILLATOR (for Rear Floor) > INSTALLATION

for Preparation Click here



1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY
  1. Connect the connector.

  1. Engage the 2 clamps to install the No. 3 indoor electrical key antenna assembly.

    NOTICE:
    Be careful when installing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.



2. INSTALL REAR SEAT CUSHION ASSEMBLY
  1. for Separate Type Seatback:
  2. for Bench Type Seatback: