Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ELECTRICAL KEY OSCILLATOR (for Rear Floor)

ELECTRICAL KEY OSCILLATOR (for Rear Floor) > REMOVAL

for Preparation Click here



1. REMOVE REAR SEAT CUSHION ASSEMBLY
  1. for Separate Type Seatback:
  2. for Bench Type Seatback:


2. REMOVE NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    B295147
  1. Disengage the 2 clamps.

  1. Disconnect the connector and remove the No. 3 indoor electrical key antenna assembly.

    NOTICE:
    Be careful when removing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.