Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure described below is for the LH side.



1. REMOVE FRONT BUMPER ASSEMBLY
(Click here)


2. REMOVE HEADLIGHT ASSEMBLY


    E241086E01
  1. Remove the bolt and 2 screws.
    Text in Illustration 
    *1
    Bolt
    *2
    Screw



    E241087
  1. Disengage the 2 clamps.

  1. Disconnect each connector and remove the headlight assembly.