HEADLIGHT ASSEMBLY > DISASSEMBLY |
| 1. REMOVE NO. 1 HEADLIGHT BULB |
![]() |
Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
| 2. REMOVE NO. 2 HEADLIGHT BULB |
![]() |
Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration, and remove it.
| 3. REMOVE CLEARANCE LIGHT BULB |
![]() |
Turn the clearance light socket with the clearance light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the clearance light bulb from the clearance light socket.
| 4. REMOVE FRONT SIDE MARKER LIGHT BULB |
![]() |
Turn the front side marker light socket with the front side marker light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.
Remove the front side marker light bulb from the front side marker light socket.
| 5. REMOVE HEADLIGHT LENS |
![]() |
Remove the 4 screws.
| *1 | Screw |
| *2 | "TORX" Screw |
Using a T20H "TORX" driver, remove the "TORX" screw.
![]() |
Using a dryer, heat the backside of the headlight unit.
![]() |
Disengage the 8 claws and remove the headlight lens.
| 6. REMOVE HEADLIGHT LENS GASKET |
Remove the headlight lens gasket from the housing.