Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR COMBINATION LIGHT LED


    E245776
  1. Install the rear combination light LED with the screw.



2. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    E238340
  1. Engage the clamp to install the rear combination light socket and wire sub-assembly.

  1. Connect the connector.



3. INSTALL BACK-UP LIGHT BULB
  1. Install the back-up light bulb to the rear combination light socket and wire sub-assembly.



    E237719
  1. Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.

  1. Engage the 2 guides to connect the rear combination light socket and wire sub-assembly.



4. INSTALL TAIL LIGHT BULB
  1. Install the tail light bulb to the rear combination light socket and wire sub-assembly.



    E237717
  1. Turn the rear combination light socket and wire sub-assembly with the tail light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.



5. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.



    E237715
  1. Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.