WASHER NOZZLE (for Front Side) > ON-VEHICLE INSPECTION |
| 1. INSPECT WASHER NOZZLE SUB-ASSEMBLY |
Operate the front washer nozzle and check the position that the washer fluid hits the windshield.

| *a | Upper Limit | *b | Standard |
| *c | Lower Limit | *d | Measurement |
| Area | Measurement | Area | Measurement |
| A | 28.2 mm (1.11 in.) | B | 257.4 mm (10.1 in.) |
| C | 166.8 mm (6.57 in.) | D | 90.4 mm (3.56 in.) |