WATER PUMP WITH MOTOR > REMOVAL |
| 1. REMOVE INVERTER WITH CONVERTER ASSEMBLY |
| 2. REMOVE INVERTER BRACKET ASSEMBLY |
![]() |
Remove the bolt and separate the motor cable protector.
![]() |
Disconnect the 2 wire harness clamps.
![]() |
Remove the 2 bolts and separate the inverter reservoir tank assembly.
![]() |
Remove the bolt and disconnect the earth wire.
![]() |
Remove the 4 bolts and inverter bracket assembly.
| 3. REMOVE INVERTER WATER PUMP ASSEMBLY |
![]() |
Disconnect the 2 water hoses.
![]() |
Disconnect the connector.
Remove the 3 bolts and the inverter water pump assembly.
| 4. REMOVE HV WATER PUMP BRACKET SUB-ASSEMBLY |
![]() |
Disconnect the clamp.
Remove the 2 bolts and the HV water pump bracket sub-assembly.