ENGINE IMMOBILISER SYSTEM (w/o Smart Key System) > PRECAUTION |
| 1.PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL |
| System Name | See Procedure |
| Power Door Lock Control System |
Click here
|
| 2.PRECAUTIONS WHEN USING TECHSTREAM |
When using the Techstream to troubleshoot the engine immobiliser system:
Connect the Techstream to the DLC3 while the ignition switch is off, and turn a door courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.
| 3.PRECAUTIONS FOR THE KEY |
The key is a precision instrument. Be sure to observe the following:
Do not drop or strike the key.
Do not allow the key to be kept in a high temperature place for a long time.
Do not use an ultrasonic washing machine to clean the key.
Keep the key away from magnets or magnetized items during use.
Do not attach any stickers to the key.
| 4.PRECAUTION FOR REGISTRATION |
If replacing any of the following parts, refer to the registration procedures (Click here).
Key
Transponder key ECU assembly
Power management control ECU