Home › Engine / Hybrid System › 1NZ-FXE EMISSION CONTROL › FUEL TANK CAP

FUEL TANK CAP > INSPECTION

for Preparation Click here



1. INSPECT FUEL TANK CAP ASSEMBLY


    A310388E01
  1. Visually check that the fuel tank cap assembly and gasket are not deformed or damaged.
    Text in Illustration 
    *a
    Gasket
    If the result is not as specified, replace the fuel tank cap assembly.



    A316056E01
  1. Confirm that ID mark V is printed on the replacement fuel tank cap assembly.
    Text in Illustration 
    *a
    ID Mark

    CAUTION:
    Make sure to use a fuel tank cap assembly that has the same ID mark, or a malfunction may occur in the fuel system.