OIL PUMP > INSPECTION |
| 1. INSPECT OIL PUMP RELIEF VALVE |
![]() |
Apply engine oil to the oil pump relief valve. Check that the valve falls smoothly into the valve hole of the oil pump body by its own weight.
| 2. INSTALL OIL PUMP ASSEMBLY |
Check the operation.
Apply engine oil to the oil pump drive rotor and oil pump driven rotor. Install the rotors to the oil pump body, then check that the rotors revolve smoothly.
Inspect the tip clearance.
![]() |
Using a feeler gauge, measure the clearance between the oil pump drive rotor and oil pump driven rotor tips.
![]() |
Inspect the body clearance.
Using a feeler gauge, measure the clearance between the oil pump driven rotor and oil pump body.