Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY

HIGH MOUNTED STOP LIGHT ASSEMBLY > INSPECTION

for Preparation Click here



1. INSPECT CENTER STOP LIGHT SET


    E068686E06
  1. Connect a positive (+) lead from the auxiliary battery to terminal 1 (B) and a negative (-) lead to terminal 2 (E).

  1. Check that the center stop light comes on.

    OK:
    The light comes on.

    Text in Illustration 
    *a
    Component without harness connected
    (Center Stop Light Set)
    If the result is not as specified, replace the center stop light set.