Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (w/ Non-removable Headrest)

FRONT SEAT ASSEMBLY (w/ Non-removable Headrest) > DISASSEMBLY

for Preparation Click here



1. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    B299149
  1. Disconnect the rubber band of the separate type front seatback cover.



2. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    B301351
  1. Disengage the 2 claws and 5 guides to remove the front seat inner cushion shield.



3. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    B299153
  1. Disengage the 3 claws and 6 guides to remove the front seat inner cushion shield.



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
  1. Disengage each clamp under the front seat assembly.



    B309593
  1. Disengage the 2 clamps.

  1. Remove the nut and front seat inner belt assembly.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
  1. Disengage each clamp under the front seat assembly.



    B309594
  1. Disengage the clamp.

  1. Remove the nut and front seat inner belt assembly.



6. REMOVE FRONT SEAT BELT ANCHOR PLATE
  1. Remove the front seat belt anchor plate.



7. REMOVE SEAT ADJUSTER COVER CAP


    B299148
  1. Remove the 2 seat adjuster cover caps.



8. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B301348E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
    Text in Illustration 
    *1
    Protective Tape



9. REMOVE FRONT SEAT CUSHION SHIELD


    B301349
  1. Remove the screw.



    B301350
  1. Disengage the 2 claws, 4 guides and clip to remove the front seat cushion shield.



10. SEPARATE FRONT SEAT AIRBAG ASSEMBLY


    B301352
  1. Disengage the fastener and separate the front seat airbag assembly wire harness.



  1. for Driver Side:



      B296414
    1. Disengage the claw and 6 clamps to separate the front seat airbag assembly wire harness.



  1. for Front Passenger Side:



      B296413
    1. Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.



11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    B299150
  1. Disengage each hook and remove the separate type front seat cushion cover with pad.



12. REMOVE FRONT SEAT AIRBAG SUB-ASSEMBLY


    B300232
  1. Disengage the 2 clamps.

  1. Remove the 3 nuts and the front seat airbag sub-assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seat cushion spring assembly is not deformed. If it is, replace it with a new one.



13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B301353
  1. Remove the 2 hog rings.



    B301355
  1. Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.



14. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    B299151
  1. Remove the 5 hog rings.



    B296401
  1. Remove the 3 hog rings.



    B296403
  1. Turn back the separate type front seatback cover.



    B299152
  1. Remove the 2 nuts and the 3 brackets.

  1. Remove the separate type front seatback cover with pad.



15. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    B300261
  1. Disengage the 2 clamps.

  1. Remove the 2 nuts and the front seat airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.



16. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B296406
  1. Remove the 8 hog rings and separate type front seatback cover from the separate type front seatback pad.



17. REMOVE SEAT SWITCH ASSEMBLY (for Front Passenger Side)


    B311799
  1. Remove the screw and the seat switch assembly.



18. REMOVE RECLINING ADJUSTER INSIDE COVER LH (for Front Passenger Side)


    B299154
  1. Disengage the 2 guides to remove the reclining adjuster inside cover LH.



19. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH


    B301357
  1. Remove the screw.

  1. Disengage the 3 claws to remove the front seat cushion edge protector LH.



20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH


    B301358
  1. Remove the screw.

  1. Disengage the 3 claws to remove the front seat cushion edge protector RH.



21. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    B300242
  1. Disconnect the 2 connectors.

  1. Disengage the claw and remove the occupant detection ECU.



22. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)
  1. Disconnect each connector and disengage each clamp to remove the front seat wire RH.



23. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    B301359
  1. Remove the 4 bolts.

  1. Disengage the 4 guides to remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.



24. REMOVE SEAT TRACK ADJUSTING HANDLE


    B301360
  1. Disengage the 2 springs to remove the seat track adjusting handle from the separate type front seat cushion spring assembly.