Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (w/ Removable Headrest)

FRONT SEAT ASSEMBLY (w/ Removable Headrest) > DISASSEMBLY

for Preparation Click here


HINT:
Setting the seat cushion of the front seat assembly using the vertical adjusting handle makes it easier to perform the following procedure.



1. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    B299149
  1. Disconnect the rubber band of the separate type front seatback cover.



2. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    B299156
  1. Disengage the 2 claws and 4 guides to remove the front seat inner cushion shield.



3. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    B299153
  1. Disengage the 3 claws and 6 guides to remove the front seat inner cushion shield.



4. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)
  1. Disengage each clamp under the front seat assembly.



    B309593
  1. Disengage the 2 clamps.

  1. Remove the nut and front seat inner belt assembly.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)
  1. Disengage each clamp under the front seat assembly.



    B309594
  1. Disengage the clamp.

  1. Remove the nut and front seat inner belt assembly.



6. REMOVE FRONT SEAT BELT ANCHOR PLATE
  1. Remove the front seat belt anchor plate.



7. REMOVE SEAT ADJUSTER COVER CAP


    B299148
  1. Remove the 2 seat adjuster cover caps.



8. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B301361E01
  1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.
    Text in Illustration 
    *1
    Protective Tape



9. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    B301362
  1. Remove the screw and vertical adjusting handle.



10. REMOVE FRONT SEAT CUSHION SHIELD


    B301363
  1. Remove the screw.



    B301364
  1. Disengage the 2 claws, 4 guides and clip to remove the front seat cushion shield.



11. REMOVE FRONT SEAT LOWER CUSHION SHIELD (for Driver Side)


    B301365
  1. Disengage the 2 claws to remove the front seat lower cushion shield.



12. SEPARATE FRONT SEAT AIRBAG ASSEMBLY


    B301352
  1. Disengage the fastener and separate the front seat airbag assembly wire harness.



  1. for Driver Side:



      B296414
    1. Disengage the claw and 6 clamps to separate the front seat airbag assembly wire harness.



  1. for Front Passenger Side:



      B296413
    1. Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.



13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (w/o Seat Heater System)


    B299157
  1. Disengage each hook and remove the separate type front seat cushion cover with pad.



14. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD (w/ Seat Heater System)


  1. for Driver Side:



      B298779
    1. Disengage the 4 clamps to separate the seat heater wire harness.



  1. for Front Passenger Side:



      B294114
    1. Disengage the claw and 3 clamps to separate the seat heater wire harness.



    B301366
  1. Disconnect the connector.

  1. Disengage the clamp.



    B299157
  1. Disengage each hook and remove the separate type front seat cushion cover with pad.



15. REMOVE FRONT SEAT AIRBAG SUB-ASSEMBLY


    B300232
  1. Disengage the 2 clamps.

  1. Remove the 3 nuts and the front seat airbag sub-assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seat cushion spring assembly is not deformed. If it is, replace it with a new one.



16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    B301353
  1. Remove the 2 hog rings.



    B301355
  1. Remove the 18 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.



17. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)


    B299186
  1. Remove the 12 tag pins to remove the front seat cushion heater assembly from the separate type front seat cushion cover.



18. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    B299151
  1. Remove the 5 hog rings.



    B301367
  1. Remove the 3 hog rings.



    B301369
  1. Turn back the separate type front seatback cover.



    B299158
  1. Remove the 2 nuts and the 3 brackets.



    B296379
  1. Disengage the 4 claws and remove the 2 front seat headrest supports.

  1. Remove the separate type front seatback cover with pad.



19. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    B300261
  1. Disengage the 2 clamps.

  1. Remove the 2 nuts and the front seat airbag assembly.

    CAUTION:
    1. The nuts must not be reused.
    2. Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.



20. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    B281073
  1. Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.



21. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)


    B296382
  1. Remove the 12 tag pins to remove the front seatback heater assembly from the separate type front seatback cover.



22. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    B301371
  1. Remove the screw.

  1. Disengage the hook as shown in the illustration.

  1. Disengage the clip and remove the front seat lower cushion shield LH.



23. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    B301373
  1. Remove the screw.

  1. Disengage the hook as shown in the illustration.

  1. Disengage the clip and remove the front seat lower cushion shield RH.



24. REMOVE SEAT SWITCH ASSEMBLY (for Front Passenger Side)


    B311799
  1. Remove the screw and the seat switch assembly.



25. REMOVE RECLINING ADJUSTER INSIDE COVER LH (for Front Passenger Side)


    B299154
  1. Disengage the 2 guides to remove the reclining adjuster inside cover LH.



26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    B301375
  1. Remove the screw.

  1. Disengage the 3 claws to remove the front seat cushion edge protector LH.



27. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    B301376
  1. Remove the screw.

  1. Disengage the 3 claws to remove the front seat cushion edge protector RH.



28. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    B301379
  1. Remove the screw.

  1. Disengage the 3 claws to remove the front seat cushion edge protector LH.



29. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    B301380
  1. Remove the screw.

  1. Disengage the 3 claws to remove the front seat cushion edge protector RH.



30. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    B300242
  1. Disconnect the 2 connectors.

  1. Disengage the claw and remove the occupant detection ECU.



31. REMOVE FRONT SEAT WIRE RH (for Front Passenger Side)
  1. Disconnect each connector and disengage each clamp to remove the front seat wire RH.



32. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    B301377
  1. Remove the 4 bolts.

  1. Disengage the 4 guides to remove the separate type front seatback spring assembly from the separate type front seat cushion spring assembly.



33. REMOVE SEAT TRACK ADJUSTING HANDLE


    B301378
  1. Disengage the 2 springs to remove the seat track adjusting handle from the separate type front seat cushion spring assembly.