Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > INSPECTION

for Preparation Click here



1. REMOVE MAP LIGHT ASSEMBLY


    E119982E13
  1. Inspect the personal lights.

    1. Connect a positive (+) lead from the auxiliary battery to terminal 3 (B) and a negative (-) lead to terminal 1 (E) or 2 (CTY).

      Result:

      Tester Connection
      Condition
      Specified Condition
      3 (B) - 1 (E)
      Personal light switches off
      Personal light LH and RH do not come on
      Personal light switch LH on
      Personal light LH comes on
      Personal light switch RH on
      Personal light RH comes on
      Personal light switches off and interior light door switch ON
      Personal light LH and RH comes on
      3 (B) - 2 (CTY)
      Personal light switches off and interior light door switch off
      Personal light LH and RH do not come on
      Personal light switches off and interior light door switch DOOR
      Personal light LH and RH comes on

      Text in Illustration 
      *a
      Component without harness connected
      (Map Light Assembly)
      If the result is not as specified, replace the bulb or map light assembly.