Home › Engine / Hybrid System › 1NZ-FXE STARTING › POWER SWITCH

POWER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL POWER SWITCH
  1. Connect the power switch connector.

  1. Engage the 2 claws to install the power switch.



2. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    B301682
  1. Engage the claw and 8 clips to install the center instrument cluster finish panel sub-assembly.



3. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. INSTALL FRONT FLOOR COVER RH
  1. Engage the 3 guides.



    B301488E01
  1. Engage the 3 clips <B> to install the front floor cover RH.

  1. Install the 2 clips <A>.