Home › Drivetrain › P510 HYBRID TRANSMISSION / TRANSAXLE › SHIFT LEVER

SHIFT LEVER > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT LOWER SHIFT LEVER ASSEMBLY
  1. Inspect shift lock operation.

    1. Move the shift lever to P.

    2. Turn the ignition switch off.

    3. Check that the shift lever cannot be moved from P to any other position.

    4. Turn the ignition switch to ON (READY), depress the brake pedal, and check that the shift lever can be moved from P to any other position.
      If the operation cannot be done as specified, inspect the lower shift lever assembly.

  1. Inspect shift lock release button operation.

    1. Move the shift lever to P.

    2. Turn the ignition switch off.

    3. Using a screwdriver, remove the shift lock release button cover.

    4. When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.
      If the operation cannot be done as specified, inspect the lower shift lever assembly.



2. INSPECT KEY INTERLOCK OPERATION (w/o Smart Key System)
  1. Turn the ignition switch to ON (IG).

  1. Depress the brake pedal and move the shift lever to any position other than P.

  1. Check that the ignition key cannot be turned to LOCK if a shift lever is in any position other than P.

  1. Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.
    If the operation cannot be done as specified, inspect the lower shift lever assembly.