REAR SEAT ASSEMBLY (for Separate Type Seatback) > DISASSEMBLY |
| 1. REMOVE REAR SEATBACK LOCK RELEASE BUTTON (for LH Side) |
![]() |
Turn the rear seatback lock release button in the direction indicated by arrow to remove it.
| 2. REMOVE REAR SEATBACK STOP BUTTON GROMMET (for LH Side) |
![]() |
Press down the separate type rear seatback cover with pad as shown in the illustration to check the slit position of the rear seatback stop button grommet.
| *1 | Slit |
![]() |
Using needle nose pliers wrapped with protective tape, disengage the 2 claws and remove the rear seatback stop button grommet from the separate type rear seatback cover with pad.
| *1 | Protective Tape |
| 3. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for LH Side) |
![]() |
Using a clip remover, remove the 3 clips.
![]() |
Using a clip remover, remove the 2 clips.
![]() |
Open the 2 fasteners as shown in the illustration.
![]() |
Disengage the hook.
![]() |
Disengage the 4 claws and remove the 2 rear center seat headrest supports from the rear seatback frame sub-assembly LH.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports from the rear seatback frame sub-assembly LH.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly LH.
| 4. REMOVE SEPARATE TYPE REAR SEATBACK COVER |
![]() |
Remove the 2 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
| 5. REMOVE REAR SEATBACK LOCK ASSEMBLY LH |
![]() |
Remove the 2 bolts and rear seatback lock assembly LH from the rear seatback frame sub-assembly LH.
| 6. REMOVE REAR SEATBACK LOCK RELEASE BUTTON (for RH Side) |
| 7. REMOVE REAR SEATBACK STOP BUTTON GROMMET (for RH Side) |
| 8. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side) |
![]() |
Using a clip remover, remove the 2 clips.
![]() |
Using a clip remover, remove the 2 clips.
![]() |
Open the 2 fasteners as shown in the illustration.
![]() |
Disengage the hook.
![]() |
Disengage the 4 claws and remove the 2 rear seat headrest supports from the rear seatback frame sub-assembly RH.
Remove the separate type rear seatback cover with pad from the rear seatback frame sub-assembly RH.
| 9. REMOVE SEPARATE TYPE REAR SEATBACK COVER (for RH Side) |
![]() |
Remove the 2 hog rings and separate type rear seatback cover from the separate type rear seatback pad.
| 10. REMOVE REAR SEATBACK LOCK ASSEMBLY RH |
![]() |
Remove the 2 bolts and rear seatback lock assembly RH.
| 11. REMOVE BENCH TYPE REAR SEAT CUSHION COVER |
Remove the 38 hog rings.

Remove the 16 hog rings and bench type rear seat cushion cover from the bench type rear seat cushion pad.
