Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM

DTC    U0424-537    Invalid Data Received from HVAC Control Module

for Preparation Click here


DESCRIPTION

If there is a malfunction in the air conditioning amplifier assembly, DTC U0424-537 will be stored.

DTC No.
INF Code
DTC Detection Condition
Trouble Area
U0424
537
Air conditioning amplifier assembly malfunction
The power management control ECU receives a communication error signal from the air conditioning amplifier assembly.
(1 trip detection logic)
Air conditioning amplifier assembly

INSPECTION PROCEDURE

HINT:
After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.
  1. Wait for 1 minute or more with the vehicle stopped, the ignition switch ON (READY), the shift lever in P, and the air conditioning system on (Lo/COOL MAX, blower speed HI).

1.CHECK DTC OUTPUT (AIR CONDITIONER)
  1. Connect the Techstream to the DLC3.

  1. Turn the ignition switch to ON (IG).

  1. Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

  1. Check if DTCs related to the air conditioning system (A/C) are output.

    Result:
    Result
    Proceed to
    DTCs related to A/C are not output.
    A
    DTCs related to A/C are output.
    B

  1. Turn the ignition switch off.



B
GO TO DTC CHART (AIR CONDITIONING SYSTEM) (Click here)
A

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY (Click here)