DTC B2313 Glass Position Initialization Incomplete |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2313 |
|
|
| 1.PERFORM INITIALIZATION (DRIVER DOOR WINDOW) |
Initialize the power window regulator motor assembly LH (for driver door) (Click here).
| NEXT | |
| 2.CHECK DTC OUTPUT |
Turn the ignition switch off.
Wait for at least 10 seconds, and then turn the ignition switch to ON (IG).
Check for DTCs (Click here).
|
| ||||
| OK | ||
| ||