Home › Vehicle Exterior › WINDOW / GLASS › FRONT PASSENGER SIDE POWER WINDOW SWITCH

FRONT PASSENGER SIDE POWER WINDOW SWITCH > REMOVAL

for Preparation Click here



1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    B307079
  1. Disengage the 10 claws and 4 guides.

  1. Disconnect the connector and remove the power window regulator switch assembly with front door armrest base panel.



2. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY


    B296730
  1. Disengage the 2 craws and remove the power window regulator switch assembly from the front upper door armrest base panel RH.